JBAY.ZONE 330 is the new single-seater Sit on Top Kayak, made entirely of laminated PVC with high-pressure DROP-STITCH technology, for unparalleled rigidity and weight support. The new inflatable canoe has been designed by JBAY.ZONE to have fun on the beach, try fishing or go on an adventure exploring the coastline, rivers or lakes or more simply to spend a weekend of sport, water fun and positive emotions.
INFLATABLE KAYAK
330
LENGTH
78
WIDTH
1
SEATS
3
AIR CHAMPS
HANDLING
The single center fin and V-shaped keel allow the Kayak 330 to achieve good travel speed and be easily maneuverable on the water.
STABILITY
Thanks to the semi-rigid seats and the construction with laminated PVC and Drop-Stitch technology with flat bottom, the Kayak 330 proves to be comfortable and stable, ideal for Cruising sessions.
SCOPE
The new Kayak 330 in Drop-Stitch fabric JBAY.ZONE is suitable to accommodate one user and carry up to 165Kg.
INTERMEDIATE USER LEVEL
INCLUDED ACCESSORIES
SITTING
The JBAY.ZONE semi-rigid polyester seat, comfortable and convenient, attaches to the steel D-rings on the inside of the inflatable tubes.
PADDLE
Double paddle with handle decomposable into three parts in aluminum with an overall length of 230cm.
PUMP
Bravo® Manual Pump 2x2000cc specific for High Pressure valves with bayonet coupling. Single-Action Double-Action mode selector switch.
BAG
JBAY.ZONE Transport Bag, spacious and compact, allows you to transport the Kayak 330 and its accessories in a practical and effortless way.
FOOTREST
The JBAY.ZONE semi-rigid footrest helps increase users’ comfort and stability while paddling.
REPAIR KIT
Repair kit consisting of two pieces of laminated PVC, in order to intervene on any unintentional damage.
TECHNOLOGY
Due to the PVC Laminate construction with UAL Drop-Stitch Technology, the JBAY.ZONE 330 Kayak, when inflated to the ideal recommended pressure of 10Psi, proves extremely rigid and is able to offer excellent weight support.
LIGHTNESS
Compact and lightweight, the overall weight of the new Kayak 330 is only 14kg, a quality that makes this canoe very easy to transport.
TRIPLE AIR CHAMBER
The three air chambers, one for the dunnage and two for the tubulars, which the Kayak 330 has, allow the inflation of each one at a pressure of 10psi corresponding to 0.7bar. The high pressure allows to obtain a decisive increase in performance, making the Kayak 330 completely similar, to the touch and to the sight, to a rigid canoe.
RESISTANCE
The Laminated PVC used to assemble the Kayak 330 is composed of two layers of High Strength PVC interspersed with a layer of Polyester to further reinforce the structure of the product.
LENGTH 330cm – 10’8
At 330cm, the 330 JBAY.ZONE Kayak accommodates a canoeist in comfort. In spite of its length, the Kayak shows great stability, thanks also to the semi-rigid seat, which can be hooked to the Kayak with the special straps, and to the semi-rigid footrest, which allow to increase the user’s safety during the paddling.
WIDTH 78cm – 31”
The 78 cm width of the hull of the Kayak 330 gives stability without affecting the quality of movement in the water, does not limit in an invasive way the paddling of the canoeist and does not slow down or inhibit the turn.
COMFORT
The height of the tubulars is perfectly sized with respect to the paddling position inside the kayak. Movements are fluid and unimpeded.
ACCESSORIES
A semi-rigid seat is included in the 330 kayak, which is significantly more comfortable and high performance than the standard inflatable seats included in most kayaks of this type. In addition to the seat, there is a double paddle with a 230cm aluminum decomposable handle, a semi-rigid footrest, Bravo dual action inflation pump, repair kit and handy canoe carrying bag.
DROP STITCH TECHNOLOGY
The Kayak 330 JBAY.ZONE has a “mixed hull” conformation: at the bow it has a V-shaped keel, which allows to cut the water making the Kayak more hydrodynamic, while in the central part it has a flat bottom, which makes it easy to maneuver. The result is an agile Kayak that maintains a fair amount of speed while being very handy. The high-strength laminate PVC with which the Kayak 330 is constructed is supported, for both the tubular and the dunnage, by Drop-Stitch technology. The internal structure is composed of thousands of strands of fabric welded to laminated PVC that allow the Kayak 330, once inflated to the JBAY.ZONE recommended pressure of 10Psi, to prove extremely rigid and resistant, similar to a wooden or fiberglass canoe.
The valves, for each of the three air chambers provided for the Kayak 330, are high-pressure valves with bayonet coupling and central safety pin. The included seat is semi-rigid, high quality, more comfortable and durable than an inflatable seat, and attaches to the Kayak 330 tubulars using special adjustable straps. The footrest provided is a firm foothold and provides excellent stability when paddling, allowing you to impart more force to your paddle movements. At the bow and stern of the Kayak 330 JBAY.ZONE you will find practical carrying handles and elastic laces to store your equipment safely during the excursion.
[devvn_ihotspot id=”10047″]
JBAY.ZONE / KAYAK 330 / MODEL: 30032 / 8056518103322
| Categoria | Drop-Stitch Kayak |
| Materiale | PVC Laminato con Tecnologia DROP-STITCH |
| Lunghezza | 330cm / 10'8'' |
| Larghezza | 78cm / 31'' |
| Peso | 14kg |
| Nr. Camere d'Aria | 3 |
| Pressione Gonfiaggio | 10psi - 13psi / 0.7Bar - 0.9Bar |
| Nr. Persone | 1 |
| Capacita' di Carico | 165kg |
| Pompa in Dotazione | a Doppia Azione Bravo 2x2000cc 2.0bar / 29psi |
| Borsa di Trasporto | in Dotazione |
| Configurazione Pinne | 1 Pinna Rimovibile |
| Kit Riparazione | In Dotazione |
| Paddle in Dotazione | Paddle a Doppia Pala con manico in Alluminio da 230cm |
| Punta Piedi | Punta Piedi Semi-Rigido in dotazione |
| Sedile | Seduta Semi-rigida in dotazione |
