JBAY.ZONE 425 is the new Kayak 2-seats Sit on Top completely in laminated PVC with High Pressure DROP-STITCH technology to provide an incomparable rigidity and weight support. The new inflatable canoe has been designed by JBAY.ZONE to have fun on the beach,to go fishing or to explore coasts, rivers, lakes or to spend a weekend between sport, water fun and positive emotions.










The single central fin and the V keel allow the Kayak 425 to reach a good travel speed and to be easily maneuvered in the water.


Thanks to the semi-rigid seats and the construction with laminated PVC and Drop-Stitch technology with flat bottom, the Kayak 425 proves comfortable and stable, ideal for cruising sessions.


The new Kayak 425 in Drop-Stitch JBAY.ZONE fabric is suitable for two users with a total weight of 205kg.





The JBAY.ZONE semi-rigid and comfortable seat in Polyester, is fixed to the steel D-Rings on the inside of the inflatable tubulars.


Double-blade paddle with a modular handle (it can be divided into three parts) with an overall length of 230cm.


Bravo® 2x2000cc Manual Pump specific for High Pressure valves with bayonet fitting. Single-Action Double-Action mode selector.


New Carry Bag JBAY.ZONE specific to carry the Kayak 425 and its accessories.


The couple of semi-rigid footrests JBAY.ZONE helps to increase the users comfort and stability of during the row.


Repair kit with two laminated PVC pieces useful in case of involuntary damages.


Thanks to the construction in Laminated PVC with Drop-Stitch UAL Technology, the Kayak 425 JBAY.ZONE is inflatable up to the recommended pressure of 13Psi: when it will reach this value, it will be rigid and with an excellent weight support.


JBAY.ZONE has managed to contain and maintain the weight of the new Kayak 425 under 25kg, now its total weight  is only 24,6kg.


The three air chambers, one for the floor and two for the tubes, available on the Kayak 425 allow that each of them can be inflated to the pressure of 13psi corresponding to 0.9bar. Thanks to the high pressure it’s possible to obtain a great increase in performances, also making the Kayak 425 completely similar, in touch and sight, to a rigid canoe.


The Laminated PVC used to assemble the Kayak 425 is made up of two PVC layers and one Polyester layer to reinforce and assure a great resistance to the kayak.

LENGTH 425cm – 13′

Into the Kayak 425 JBAY.ZONE there is enough space for two canoeists simultaneously thanks to the hull length of over four meters. In addition to the two semi-rigid seats that can be hooked with the special straps, there are also a pair of footrests on the kayak 425 to increase the stability of the user during rowing.

WIDTH 78cm – 31”

The hull of the Kayak 425 is wide enough to allow the canoeists’ to move freely. At the same time it doesn’t result to be too much wide and this is perfect, as in this way there is not the risk  of slowing down or making worse the agility of movement in the water.


To paddle into the JBAY.ZONE Kayak 425 is comfortable. The users’ movements are flowing and without any obstacles.


In the kayak 425 JBAY.ZONE inserted a couple of semi-rigid seats, much more comfortable than the inflatable seats included in most kayaks of this kind, a pair of double-blade paddles with a removable aluminum handle of 230cm, a pair of footrest, a pump for inflation, a repair kit and a practical bag to carry the canoe.


The Kayak 425 JBAY.ZONE is hydrodynamic, with a mixed hull that has a rigid plastic V-shaped keel at the aft with the central part of the flat bottom. This manages to guarantee a quite good speed without making the kayak too heavy during the veer, keeping it very handy and agile. The high resistance laminated PVC with which the Kayak 425 has been built, it’s supported, both for the tubulars and for the floor, by the Drop-Stitch technology. The internal structure is made up of thousands of fabric threads welded to the laminated PVC that allow the Kayak 425, once inflated to the pressure recommended by JBAY.ZONE of 13Psi, to be extremely rigid and resistant, completely similar to a wooden canoe or in fiberglass.

The valves, for each of the three air chambers installed on the Kayak 425, are high pressure with bayonet fitting with central safety pin. The two seats -included into the set- semi-rigid of high quality, more comfortable and resistant than the classic inflatable seats, can be fixed to the tubes of the Kayak 425 throught some special adjustable straps. The two footrests provided assure a firm support and an excellent stability when paddling, allowing you to give more force to the paddle movements. At fore and aft of the Kayak 425 JBAY.ZONE there are the practical carrying handles and the elastic laces to store your equipment safely during the trips.

JBAY.ZONE / KAYAK 425 / MODEL: 30014 / 8056518103148

Category Drop-Stitch Kayak
Material  Laminated PVC DROP-STITCH Technology
Length 425cm / 13'
Width 78cm / 31''
Weight 24.6kg
Air Chambers 3
Inflation Pressure 13psi - 15psi / 0.9Bar - 1Bar
Users 2
Recommended User Weight 205kg
Pump Included,Double Action Bravo Pump 2x2000cc 2.0bar / 29psi
Carry bag Included
Fins 1 Removable
Repair Kit Included
Paddle  Included, 2x Double Blade Paddles with Aluminium Shaft length 230cm
Footrest 2x Semi-rigid Footrest Included
Seats 2x Semi-rigid Seats Included